UNITECH · Terminal BlocksSeries
Pluggable Terminal Blocks, 7.50 / 7.62 mm
AM / HT family · 12 parts
Two-part connectors: a plug that takes the wires and a header that mounts on the PCB, so a board can be unplugged without disturbing the wiring. This page lists the AM2EDG series at 7.50 / 7.62 mm pitch.
- Pitch
- 7.50 – 7.62 mm
- Rated current
- 15 A
- Rated voltage
- 300 V
- Poles
- 2 – 24
- Wire range
- 28 – 12 AWG
From the catalogue12 parts
Pitch7.50 – 7.62 mm
Rated current15 A
Rated voltage300 V
WithstandAC 1500 V / 1 min
All parts
12 parts, as catalogued.
| Photo | Part number | Pitch mm | Poles | Rated V | Rated A | Wire AWG | Torque | Temp. range | Poles needed | Quantity | Add |
|---|---|---|---|---|---|---|---|---|---|---|---|
| AM2EDGK-7.5-7.62 | 7.50/7.62 | 2P – 24P | 300 | 15 | 28-12 | 0.4 N·m (3.6 lb·in) | −40 °C to +105 °C | |||
| AM2EDGKB-7.5-7.62 | 7.50/7.62 | 2P – 24P | 300 | 15 | 28-12 | 0.4 N·m (3.6 lb·in) | −40 °C to +105 °C | |||
| AM2EDGKAM-7.5-7.62 | 7.50/7.62 | 2P – 22P | 300 | 15 | 28-12 | 0.4 N·m (3.6 lb·in) | −40 °C to +105 °C | |||
| AM2EDGKM-7.5-7.62 | 7.50/7.62 | 2P – 22P | 300 | 15 | 28-12 | 0.4 N·m (3.6 lb·in) | −40 °C to +105 °C | |||
 | AM2EDGKBM-7.5-7.62 | 7.50/7.62 | 2P(2P – 22P)† | 300 | 15 | 28-12 | 0.4 N·m (3.6 lb·in) | −40 °C to +105 °C | |||
 | AM2EDGKA-7.5-7.62 | 7.50/7.62 | 2P – 24P | 300 | 15 | 28-12 | 0.4 N·m (3.6 lb·in) | −40 °C to +105 °C | |||
 | AM2EDGV-7.5-7.6† | 7.50/7.62 | 2P – 24P | 300 | 15 | — | — | −40 °C to +105 °C | |||
 | AM2EDGVC-7.5-7.62 | 7.50/7.62 | 2P – 24P | 300 | 15 | — | — | −40 °C to +105 °C | |||
 | AM2EDGR-7.5-7.62 | 7.50/7.62 | 2P – 24P | 300 | 15 | — | — | −40 °C to +105 °C | |||
 | AM2EDGRC-7.5-7.62 | 7.50/7.62 | 2P – 24P | 300 | 15 | — | — | −40 °C to +105 °C | |||
 | AM2EDGRM-7.5-7.62 | 7.50/7.62 | 2P – 22P | 300 | 15 | — | — | −40 °C to +105 °C | |||
 | AM2EDGVM-7.5-7.62 | 7.50/7.62 | 2P – 22P | 300 | 15 | — | — | −40 °C to +105 °C |
No parts match.
Values marked † are printed this way in the catalogue and are being confirmed with the UNITECH technical team. Click a part number to see it in the full part finder. Photos are from the UNITECH catalogue.
What to send us
One message, no back and forth.
- Part numberThe code from the table. If you have a sample or a drawing, send a photo on WhatsApp.
- PolesHow many positions you need, within the range listed for that part.
- Plug and headerPluggable blocks are two parts. If you need both the plug and the PCB header, list both part numbers.
- QuantityPieces, or sets for a production run.
- Wire sizeThe wire you will clamp, so we can check it against the listed wire range.
Reading the table
- Pitch
- Centre-to-centre distance between poles, in mm. It must match the hole spacing on your PCB. Some parts list two pitches, such as 5.00 / 5.08 mm.
- Poles
- The range of position counts the part is made in, e.g. 2P – 24P.
- Rated V / A
- Rated voltage and current as printed in the catalogue.
- Wire AWG
- Wire range the clamp takes. A dash means no range is printed.
- Torque
- Tightening torque for the screw, as printed.
- Withstand
- Every part in the catalogue lists a withstanding voltage of AC 1500 V for 1 minute.
Other terminal block groups
More from the same catalogue.
Gateway of India, MumbaiOur base: Lohar Chawl, Mumbai
Request a quote
Have a part number? Get a quote.
Send part numbers, quantities or a drawing. We come back with the matching part, price and availability.
- Part numbers, drawings or samples
- Single items or bulk quantities
- Delivery across India